Warning: Trying to access array offset on false in /home/u291680573/domains/yachtingnews.com/public_html/wp-content/plugins/schema/includes/integrations/amp.php on line 29
HOW TO ROLL THE JIB - Yachting News
Categories: How toSAILBOATS

HOW TO ROLL THE JIB

Leggi l’articolo in italiano

Nowadays, almost all cruise boats are equipped with a folding fore sail which opens or closes through the jib furling. A simple operation, since it’s sufficient to “pull” a rope toopen and “pull” a sheet to close. But we must respect a sequence of actions and some precautions in order to not make our efforts useless or too hard.

At first, a note concerning the sequence. If we must lower the mainsail in the traditional way, that is with the bow to the wind, it’s better to roll the jib at first. This is necessary to prevent the clew cringle from hitting the person standing at the mast.

Moreover, the lifted mainsail offers the possibility to close the jib in a different sailing point from the classic close-reach, with the mainsail covering the jib by spilling it completely and allowing to us to roll it up.

Now, we can start the manoeuvre. At first, we must spill the sail. We don’t’ need to bring the bow to the wind, as we explained some days ago for the case of the mainsail furling. The jib has no sticks pressing on the mast, so it’s easy to decrease tension. It’s sufficient to take a close reach and slack the jib sheet of about 30% in order to let the fore sail spill.

Then, you can use the jib furling sheet to furl the sail. The ideal condition is when you have a person hauling the jib sheet and another one spilling the sheet gradually in order to hold the jib spilled while furling it in the right way (neither too fast nor too slow).

Before using the jib furling sheet please verify that stopper is open. If the manoeuvre is too hard, you can loosen the backstay tension a little. Hauling the furling jib sheet in the point going out the stopper before block is not a good idea because it creates a great friction.

The manoeuvre might be very hard anyway, especially in rather big boats. You can use a winch or, if you prefer, you can haul the jib furling sheet in a more advance position, at about mid-boat, by flexing on your legs, without forcing your back, better with a person recovering the slack.

mastermind

Recent Posts

Honda Marine 4XC FRP: A stellar debut in Genoa for the new line developed with BMA

Honda Marine Europe selected the Genoa International Boat Show for the world debut of its…

1 day ago

Majesty 65, Sea Trial Video in Dubai: The Flybridge Delivering Superyacht Comfort in Under 20 Meters

With a length of nearly 20 meters and a beam exceeding 5 meters, the Majesty…

2 days ago

Ranieri Next 370 SH: Comfort, Solid Build, and a Surprising Hull. Sea Trial

Can sportiness and habitability truly coexist in the same boat? It is from this question…

4 days ago

Aquila 35 Sport: The new sports catamaran bringing the 45 Sport concept to a more compact size.

Aquila Catamarans expands its Sport range with the new Aquila 35 Sport. Unveiled at the…

4 days ago

PRESTIGE, three new yachts and two ranges: here are all the debuts presented in Cannes

The Cannes Yachting Festival 2026 marked the beginning of a new phase of development for…

1 week ago

SASGA Menorquín 36 Open, the Mediterranean dayboat redefining life on board

Engine options up to 640 hp, 23-knot cruising speed, and spaces designed to experience the…

1 week ago