Categories: MOTOR BOATSNews

HERE IS OPEN 60, MADE OF VOLCANIC ROCK FIBRE

Leggi l’articolo in italiano

A 34-thousand-mile world tour through the North-West passage and south of the big southern capes. This is the aim the Austrian skipper Norbert Sedlacek has set for 2018. This is why it has wanted a strong boat, able to sail in the strongest storms and in the zones threatened by growlers, small ice pieces detaching from icebergs. And here’s the challenge of challenges: building a boat in composite material by creating a sandwich of balsa and volcaninc rock fibre to face extreme conditions.

The project has been entrusted to Vincent Lebailly Yacht Design, an architecture studio which has already traced the first lines of an Open 60 inspired to Imoca models but with some innovations.

The boat of 4.90 metres made of balsa and volcanic rock fibre tested in the ocean

The idea of using the volcanic rock fibre – which is obtained by melting rock at 1500 degrees – is not new and the architecture studio itself has already used it to build and test a boat of 4.90 metre in the ocean. But it would be the first time, according to what designers declare, that it will be used this way, by creating a balsa composite (the use of epoxy resin will be minimised) in order to build a very strong biodegradable boat. Moreover, even though rock fibre is a little more expensive than glass fibre, it is cheaper than carbon. This way builders are safe that the necessary budget will be lower than for Imoca 60. Finally, the hull will be provided with several watertight compartments in order to ensure the greatest safety in case of leaks provoked by iceberg collisions.

Environment is an issue to which both the skipper and the designer are very attached. The boat, in fact, will be powered only by renewable energy in order to minimise the environmental impact in zones where the man’s presence is practically null and environmental balances are very delicate.

In July 2018, Norbert Sedlacek will leave from Les Sables d’Olonne to Northern Alaska, Bering’s straits and Cape Horn. From there, he will set course to Good Hope Cape, Southern Australia, Cape Horn again and finally Les Sables d’Olonne in February 2019. In practice, one and a half time Vendée Globe.

mastermind

Recent Posts

Scanner Envy 1100: Full test and walkthrough of the inboard version

We Tested the Scanner Envy 1100 in Its Sterndrive VersionIn the dynamic and fascinating universe…

2 days ago

Fountaine Pajot celebrates half a century of innovation in the world of catamarans

Fountaine Pajot celebrates fifty years of activity. The anniversary coincides with a particularly important phase…

3 days ago

Scanner Marine at Cannes 2026: three Envy maxi-RIBs combining power, sportiness, and comfort

Scanner Marine is gearing up to play a leading role at the Cannes Yachting Festival…

4 days ago

SilverCat leads the Gulf catamaran boom: the market is set to exceed one billion US dollars by 2031

The waters of the United Arab Emirates are undergoing a profound transformation. The expansion of…

5 days ago

Isofan Marine SKY Clear: Stoppani introduces the first bio-based clearcoat

The full name is Isofan Marine SKY Clear UHS ESS&RE: a bit long, but as…

6 days ago

Cayman 37.0 Hard Top: The New Maxi-RIB Is Powerful and Stable. The Sea Trial

Performance, liveability, and comfort in a new dimension. That is how the new Cayman 37.0…

1 week ago